FX PE Guillotine Pipe Cutter for HDPE Pipes | DN110–DN355
- Model
- GPC4
Item specifics
- Product Type
- PE Guillotine Pipe Cutter
- Applicable Pipe Material
- PE / HDPE pipes
- Pipe Size Range
- DN110–DN355 (4"–12")
- Cutting Method
- Manual guillotine cutting
- Blade
- Hardened steel blade, hard chrome coated
- Cutting Accuracy
- Square cut within ±3 mm (1/8")
- Frame
- Heavy-duty welded steel frame
- Operation Environment
- Suitable for trench and open-ground operation
- Clearance Requirement
- Minimum clearance around pipe: 102–152 mm (4"–6")
Review
Description
FUSINGX GPC Series PE Guillotine Cutter
（Square Cut · Clean Operation）
Product Overview
PE Guillotine Cutter
· Pipe material: PE / HDPE
· Cutting range: 50–355 mm (model dependent)
· Cutting type: Manual guillotine cutting
· Operation: On-site / trench operation
· Application: PE pipe installation & fusion preparation
Model Selection
| Item No. | Model No. | Cutting Range | SDR |
| 740010 | GPC4 | 50 - 125mm (1½" - 4") | SDR15.5 - SDR9 |
| 740020 | GPC10 | 90 - 250mm (3" - 10") | SDR15.5 - SDR9 |
| 740030 | GPC12 | 110 - 355mm (4" - 12") | SDR17 - SDR9.3 |
Different models are available to cover a wide range of PE pipe diameters.
Close-up views of the cutting blade and pipe support during operation.
Features & Advantages
Square Cutting for Fusion Preparation
Provides square and consistent cuts on PE and HDPE pipes, suitable for direct fusion preparation.
Clean Guillotine Cutting Structure
Manual guillotine design ensures stable cutting without chips or dust during operation.
Compact Design for Trench Operation
Compact structure allows operation in trenches and confined working space.
GPC4 PE Guillotine Cutter – Cutting Demo
FX Series – System View
FusingX FX Series – System View
FX series focuses on professional pipeline fusion systems.
· Electrofusion fittings
· Electrofusion control units
· Butt fusion machines
