All

This article explains the anti-slip pad system used on large-diameter FX series butt fusion machines. Designed to reduce pipe movement during alignment and welding, the adjustable pads increase contact area and distribute clamping force more evenly. With 96 pads used on models such as the FX1000, the system improves stability under real jobsite conditions without changing the welding process.

This article explains the internal gear-driven structure used in our pipe fusion facers. Unlike common chain-driven designs, the full gear transmission provides higher efficiency, smoother rotation, and long-term stability. The facer drives both cutter plates simultaneously, ensuring even and consistent facing on both pipe ends. This design reduces vibration, simplifies maintenance, and delivers reliable performance for continuous butt fusion welding operations.

The FX series green heating plate is designed as a standard component for high-end butt fusion machines. It features multi-point temperature testing, a thicker plate structure, high-quality coating, and reliable internal components. By focusing on temperature consistency and long-term stability, the green heating plate supports reliable welding performance under real jobsite conditions.

This article introduces the standard remote control used on FX series butt fusion machines. Designed for on-site operation, the remote provides emergency stop, forward and backward movement control, and trimmer operation. With a magnetic design for easy placement, it allows operators to work more flexibly and safely during pipe alignment and welding processes.

To support customer orders after the Spring Festival, the factory has prepared sufficient inventory in advance. Most items shown are unpainted structural components, as all finished and painted products have already been shipped before the holiday. This inventory is reserved to ensure efficient production and stable delivery after the holiday.

This article previews the upcoming FUSINGX rubber roller pipe stand, designed for supporting and handling large-diameter PE pipes from DN630 to DN1200. Built with a heavy-duty steel structure and rubber-coated rollers, the stand provides stable support and smooth pipe movement during butt fusion welding and on-site pipe handling operations.

This article introduces a practical PE pipe cutting method designed for trench and on-site applications. Side-type PE pipe cutters allow cutting when space is limited and pipes are already installed. With clean cuts and minimal debris, this method is suitable for electrofusion and butt fusion preparation, especially for on-site PE pipe installation and adjustment.

This article explains why clamp configurations differ across FX series butt fusion machines. Models up to 315 use fewer clamp blocks, which is sufficient for smaller pipes. From size 355 upward, the number of clamp blocks increases to form a full-circle arrangement, providing more even contact and better stability for larger and heavier pipes during welding.

The FX500 butt fusion welding machine is a practical mid-range model designed for everyday HDPE pipe welding. Built around the commonly used 500 mm pipe size, it features a familiar structure with a clean, balanced layout. With stable clamping, a mobile hydraulic unit, and standard facing and heating tools, the FX500 is well suited for regular on-site pipeline work.

Anti-slip pad blocks developed by FusingX improve pipe clamping stability on large FX series butt fusion machines, including FX800 and above.

The FX450 butt fusion welding machine is designed for HDPE pipe welding in the 180–450 mm diameter range. It covers commonly used pipe sizes in municipal and general pipeline projects. With a stable steel frame, enclosed hydraulic unit, and clear operation logic, the FX450 is suitable for long-term, continuous on-site construction work.

This article compares the first- and second-generation FusingX hydraulic units, highlighting how the latest design evolved through real job-site use. Based on long-term field feedback, the second-generation unit improves mobility, protection, operating flexibility, and overall usability, making it better suited for HDPE butt fusion welding applications and long-term on-site work.

This article documents a factory photo record of the FX1000 butt fusion machine taken on December 30, 2025. The FX1000 follows the same design and material system as other FX series models, with differences mainly in overall size. The photos highlight structural details such as the side frame, clamp design, and adjustable anti-slip pads.

The FX800 butt fusion machine is designed for large-scale, large-diameter pipeline welding projects. Supporting pipes from 450 to 800 mm, it features a dedicated hydraulic unit, safety-focused structural details, and clear operating logic. These design choices help ensure stable, controlled, and reliable operation in demanding construction environments.